Showing posts with label cock pump. Show all posts
Showing posts with label cock pump. Show all posts

Wednesday, March 7, 2012

120307 The Lubrication Affect

Another very important topic... Lube!
Now, I had mentioned in my earlier post that the JOH2O Water Based Lube is my preferred choice, and it still is. (Unless your using the pump in the bath-tub or shower, then you WILL need an oil based lube. - trust me. Ill explain later.)

But how much lube? How do you apply it? Why?

Well, the why is easy. If your skin can't easily move in the tube, it can't stretch. If it can't stretch, it will tear. If it tears, you will hurt yourself. I heard a quote a long time ago that still rings in my head: "If done right, the skin of your dick will stretch a mile without tearing an inch. You tear it an inch, and you will hurt for miles.". LoL.

So, How much?

I apply about a 1/2 a teaspoon (putting it generously).

How do I apply it? & Why...

I actually get myself to at least a semi-hard state(the harder, the better) and apply the lube to the bottom of the inside of the tube. This way I can stick my dick in, and move it around until I am confident that my head and the neck are lubed up.

That's right, get it messy!

Right before I begin applying negative pressure, I add one more drop to the base (you only need a drop, that JOH2O is expensive), on my skin between my skin and the cylinder base, and spin the cylinder a few times.

Why?  If you can spin the cylinder over your cock when negative pressure is applied, then you are using the lube correctly and effectively, and your cock is going to stretch and expand on the inside and stretch your outer skin evenly.

If you can't spin your cylinder around your cock under negative pressure, the walls of the cylinder are holding your skin in place, and your cock will expand on the inside and your outer skin will tear! (This can also cause blisters as well - blisters and tears will cause a world of hurt. (Let it happen once, you'll know what I'm talking about; or heed my advice and do it right).

Continue to try to spin the cylinder around your cock a few times between 3 and 5psi before you go crazy with the negative pressure. Drop pressure and spin it a few times every now and then to make sure the lube is distributed evenly inside. You will see amazing results.

Now, lastly, oil based vs water based lube.

Water based lube means that water will dissolve the lube, so make sure you are NOT adding any more water to the water based lube. It will counteract the lubrication, and defeat its purpose. Apply water based lube to DRY surfaces only.

When playing with your pump around water(ie: shower, tub, hot tub, pool, etc), the best thing to do is to use an oil based lube, and of course practice the same applications as I mentioned earlier.

Clean up is a little different because regular soap and water will not cut it. Anti-bacterial soap will work best, but don't worry too much, your skin will absorb what oil you can't clean off and use it in the healing process.
Have fun, and be safe!

Sent via BlackBerry
pumpingexpert.blogspot.com

Tuesday, March 6, 2012

120306 Some Q&A

So, I've gotten a lot or responses after the last new posts. I'll answer a few of 'em here.
*******
Jim asked: Hi, tell us a little bit more about yourself.
Well, I 36 years old, I own my own business, as well as a government employee. I am married, and my wife knows that I pump.  She doesn't like it, so I don't do it around her. We brought the pump into the bedroom once, and my wife found it interesting, however, she is intimidated by it, so it's not brought into the room any more.
*******
Dirk asked: Are you still pumping?
Am I pumping right now? No. The last time I pumped was this morning. I try to pump at least once a day. I have come home for lunch once to do it because I was thinking about it all day.
I'm not a crazy fanatic that let it consumes my life, however I do enjoy it.
*******
"The Kid" asks: Where are you at?
I live in Albuquerque, NM.
*******
Jess Commented: Awesome Blog!
Thanks for reading Jess! And thank you all for being awesome readers!
*******
If you would like to be a guest blogger, please feel free to email me at pumpexpert@hotmail.com
Sent via BlackBerry
pumpingexpert.blogspot.com

Monday, March 5, 2012

120305 Latest Pics

Latest Pics







120305 OverPumping

So, I get it... Pumping can get addicting. It puts me in a high almost all day when I pump to where after a few hours, I want to go back and do it again; however unless your rich, and can afford to stay at home all day, and not interact with anybody, that just can't happen.

Besides, its good to give your dick a break every now and then. Giving your cock a break does several things. It allows your cock to recuperate from the (intentional) damage (caused by the stretching) and adjusts to the new way of doing things; and prevents yourself from getting painful and damaging head blisters.  (will talk about those in the next post).

So, give it a break for a few days every now and then. Especially if you go hard for a few days (like I like to do). Your cock will thank you, and when you start up again, it will be that much more pleasurable.
Until next time.

Sent via BlackBerry
pumpingexpert.blogspot.com

Thursday, February 2, 2012

Finally got my new Cylinder

So, I finally got my new cylinder today after several months of waiting. Since its been like 4 months since I've used the pump, I know I need to take it super slow, and super easy.

Like I mentioned earlier, I don't want to start out with more than 5lbs PSI right off the bat because you just don't want to hurt yourself OR develop a bellpepper head (not attractive, and very painful). Starting off with a small amount of pressure allows blood to naturally flow into your dick, and kinda forces you to do Keigels.

I alway recomend swurling the cylinder around to give the base of your dick some ease and promote circulation. The more you move it, the more tension you put on that long tendon that hold your dick to your pelvic bone. That's what you wanna feel working. Don't worry about the skin, the head. If you get that inner tendon working and stretching, you are on your way my friend...
Until next time...
Sent via BlackBerry
pumpingexpert.blogspot.com

Wednesday, January 11, 2012

So,now that you got your pump...

Blog 3

So, now that you got your pump, your lube, and your
Mityvac, your ready to get started. Now, as with any toy us guys get, the first thing we wanna do is play with it, HARD; however with this one you wanna start slow.  Not doing it right can cause some negative effects, and you're not going to end up happy, or hurt.  If you end up hurt, you will be REALLY unhappy!  So, please, follow all the precautions.








I know you wanna get into it, and "pack" the tube with your dick, but don't! You will get hurt!  This is something you get to over time.

First thing I suggest is to get your self a little hard, if you go in totally soft, it will just hinder things a little bit. Stiffing up a little bit will definitely start getting blood pumping. You don't need a raging hard on, no needs to try. A stiffy will be just fine.

Once you've got a decent stiffy, go ahead and apply a little bit of lube to the cylinder and your cock. Don't need to goop it on, just enough to get the wet look. Make sure that you have the base of the cylinder lubed for the seal.

Once you've all lubed up, go ahead and insert cock, and start pumping. Start at 2 1/2 PSI, and work to 5PSI. Don't take it any further than that. Now the longer you pump, the more blood entering your cock will decrease the pressure. You kinda have to drive here, because you will wanna maintain 5PSI. Don't take it any higher than 5PSI, or you will develop blisters and a donut. You don't want that. You will be able to reach a higher PSI, but your first day is not the day for it. Stay with 5. [:)]

20 / 25 Min, then release. Give your cock a break. Trust me, your big boy needs to breath too. It will prevent the donut and blisters! I usually can't go more than 3 25 min sessions before I'm so horny I need to shoot myself off. Enjoy! It will be awesome!


Welcome - Introduction

So, I've been pumping for several years now, and learned a lot about what pumping is about, what it takes, what is effective, what is not, as well as what is dangerous and what isn't.

I've decided to start this blog to discuss my experience, as well as to document a new beginning. I stopped several months back, and decided I wanted to start again. Now that I am more experienced, I would like to share those experiences with who ever's out there to show how pleasurable it is, what is the good stuff, and what to stay away from.

Hope you stay tuned.